Monarch-instrument Vibration Strobe Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Monarch-instrument Vibration Strobe. Monarch Instrument Vibration Strobe User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 8
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
MONARCH INSTRUMENT
15 Columbia Drive
Amherst, NH 03031-2334 USA
Phone: (603) 883-3390
Fax: (603) 886-3300
Website: www.monarchinstrument.com
Instruction Manual
Vibration Strobe
Printed in the U.S.A. © Monarch Instrument 2002 all rights reserved
1071-4800-121
Vue de la page 0
1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - Vibration Strobe

MONARCH INSTRUMENT15 Columbia DriveAmherst, NH 03031-2334 USAPhone: (603) 883-3390Fax: (603) 886-3300E-mail: [email protected]:

Page 2 - Safeguards and Precautions

Safeguards and Precautions1. Read and follow all instructions in this manual carefully, and retainthis manual for future reference.2. Do not use this

Page 3 - TABLE OF CONTENTS

SPECIFICATIONSFlash Rate Range: 100-12,000 FPM (Flashes Per Minute)Locking Range: Wide Mode: 600 to 10,000 RPMNarrow Mode: 200 to 8,000 RPMAccuracy: ±

Page 4 - REPAIR/SERVICE/PARTS

Figure 1 Display Panel1INTRODUCTIONThe Vibration Strobe is a truly portable, battery-operated stroboscope that is suited for a wide rangeof industria

Page 5 - PREPARATION FOR USE

2PREPARATION FOR USEThe Vibration Strobe is a portable lightweight strobe flash unit with internal battery that will flash formore than 1 hour at 1800

Page 6 - LAMP REPLACEMENT

3OPERATIONTo turn on the stroboscope, depress and hold the trigger. When the strobe is powered up in theInternal (INT) mode, it will begin flashing i

Page 7 - MOTION STUDIES

4The Narrow and Wide Bandwidth selector on the strobe’s front panel can be used to optimize its’ability to lock onto the vibration signal at any speed

Page 8 - PHASE ANALYSIS

5To set-up for balancing or phase measurement, a data collector or vibration analyzer must be usedthat is capable of interfacing with the Vibration St

Commentaires sur ces manuels

Pas de commentaire