Monarch-instrument ACT-3 Manuel d'utilisateur

MONARCH INSTRUMENT15 Columbia DriveAmherst, NH 03031-2334 USAPhone: (603) 883-3390Fax: (603) 886-3300E-mail: [email protected]:

53.78 [96]1.89 [48]3.58 [91]1.74 [44]Panel Cutout0.28 [7] 6.00 [152] 0.31 [8]1.69 [43]button. The next reading will always update both values. This

6Normal line cord connections are as follows:Black - to L (Live)White - to N (Neutral)If the unit is dc powered, connect the dc supply Positive to the

AC OR TTLSOURCEWHITE BLACK BROWN BLUE BROWNBLACKBLUEShield to COMShield to COMM-190WMagnetic SensororSLS - Smart Laser SensorP5-11Proximity SensorROS-

8Figure 5 Current and Analog Output Connections3.0 THROUGHPUTThroughput is a measure of how fast the instrument processes data. The rate at which th

9input. Above an input of 31 Hz, the alarms respond within 66 milliseconds. Below this inputthey respond within (1 ¸ input frequency) seconds.The FA

10NOTE: For applications where there is more than one pulse per revolution, the ScalingMode must be used.4.2 Push ButtonsThe five push buttons on the

11To set a value greater than 99999, press the RECALL button causing all the decimal points to light,indicating that the displayed value must be multi

63(&,),&$7,21663(&6↓ ↓ ↓ ↓ 02'(/→→→→$&7$ $&7$ $&76SHHG5DQJH 530WR530,QSXW)UHTXHQF\

Safeguards and Precautions1. Read and follow all instructions in this manual carefully, andretain this manual for future reference.2. Do not use this

2.0 INSTALLATION and POWER ... 52.1 Noisy Environments ...

6.12 BAUD (Baud Rate) ... 136.13 LOEND (Low End) ...

11.0 GENERAL OVERVIEWThe ACT-2A / ACT-3A / ACT-3 digital panel meters are extremely versatile instruments. The user hascomplete control of the unit c

2user. A moment later it measures the input frequency again. The difference of these two,scaled frequencies is divided by the time interval between t

31.2.1 Auto RangingIf the instrument is set to auto range (AUTO), it will always display data to the maximumresolution, utilizing all five digits in t

4hysteresis would be 5% of 100 or 5. This value is then subtracted from the set point (itwould be added for a low limit) so that the absolute value i